do i need to download driver for mac 4 bay arry

#Do i need to download driver for mac 4 bay arry drivers#
#Do i need to download driver for mac 4 bay arry software#
#Do i need to download driver for mac 4 bay arry windows#

With the following RAID modes, recovery is possible using the same product. If critical data is going onto a RAID array, you should back up the data on another physical drive or logical set of drives. RAID should not be considered a replacement for backing up your data. Note: If a drive or drives were damaged, it is possible that the RAID array may be permanently unrecoverable. If a RAID controller has failed, you should get the exact same model of RAID controller. RAID arrays are typically not accessible when they are moved to another controller, and data may be unrecoverable if the drives are out of order or have been formatted or accessed by another RAID controller. Although standard RAID levels are generally agreed upon throughout the industry, the implementation varies between manufacturers. In order to rebuild a RAID array, you need to replace a physical drive with an identical drive on the same RAID controller. Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

Click Add, assign a drive letter, and click OK.

If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths.

Make sure that you back up all of your data before you reformat the hard drive. Note: Formatting a hard drive erases all of the data on it. Follow the on-screen instructions to complete the reformatting. Right-click unallocated and click New Simple Volume.

If the hard drive is listed with unallocated space, the hard drive needs to be reformatted.

#Do i need to download driver for mac 4 bay arry windows#

To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.When you test the hard drive and hard drive enclosure, it is recommended that you do the following: Ideally, you should test a component that you know works in another setup. Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists.Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.To test your setup components, try the following: You can test to make sure that the following components are working correctly and are not the source of the issue: When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems.

#Do i need to download driver for mac 4 bay arry drivers#

If you have a hard drive controller card that does support the port multiplier feature but it is only reading one hard drive at a time, update the drivers of the hard drive controller. To find the most current drivers, click here. If your computer is only recognizing one of your hard drives, you need to plug the eSATA cable into a SATA controller that includes the port multiplier feature. If none of your current hard drive controllers include this feature, you can add a hard drive controller that does support port multiplier in any available expansion slot (for example, PCI, PCI-Express, PCMCIA, CardBus, or ExpressCard). has hard drive controllers available that support the port multiplier feature. To view the hard drive controllers, click here. SATA hard drive controllers require a feature called port multiplier to read more than one hard drive per SATA or eSATA port. The port multiplier feature is not standard on many SATA hard drive controllers. These versions of Windows cannot detect multiple drives in any RAID mode if the total size exceeds 2 TB. The maximum supported partition size for some 32-bit Windows systems is 2 TB.

#Do i need to download driver for mac 4 bay arry software#

OS independent No software or drivers required RAID 3 (Striped set with Dedicated Parity)Ĭurrently tested with up to 4 TB 5400 RPM hard drives per bay (16TB total) RAID 10 (1+0, Striped set of Mirrored Subset)